71000-0 SETAFLASH ‘SERIES 7PLUS’ CLOSED CUP TESTER 

ASTM D3278; ASTM D3828 - IP303 Part 1 and 2; ISO 3679; ISO 3680; BS 6664 Parts 3 and 4;BS 3900 Part A13; BS EN 456; ASTM E502; UN Class 3 Non-viscous Flammable Liquids; CHIPS Regulations; Classification of Dangerous goods for Carriage: Viscous and Non-Viscous liquids; EPA 1020 A and B; IP / ASTM Small Scale draft method

·          Fully automatic operation

·          -30°C to 100°C temperature range

·          Flash point test in less than 2 minutes

·          Small sample size - 2ml

·          Rapid equilibrium and ramp modes

·          Programmable test parameters

·          Integral printer and RS232 interface

Setaflash 'Series 7Plus' is similar to the 'Series 7' instrument but incorporates electronic peltier cells which enable testing of samples at sub-zero
temperatures down to -30°C. The peltier cells also allow rapid heating and cooling of the cup to reduce the cool down time in between tests. 

SUPPLIED WITH: 2 ml syringe, -30° to 100°C secondary reference thermometer with certificate of calibration and instruction manual.

Note: A supply of cooling water is required (for -30°C the flow must be 0.6litre/min at 5°C or lower).

Temperature Range:                -30° to 100°C

Test Modes:                               Rapid Equilibrium and Ramp

Test Duration, RE Mode:          1 min. standard, or user selectable 1 to 99 min.

Test Duration, Ramp Mode:     Variable, user definable up to 5.5°C/min. within 99 min. and100°C limits

Computer Interface:                 RS232C

Voltage Range:                          110/120V and 220/240V 50/60 Hz (switchable)

Power:                                        200W (maximum)

Size (HxWxD):                            21 x 49 x 30cm

Weight:                                      11.2kg

ACCESSORIES

71001-0 SETA-VENT 

Portable fume extraction and draft shielding 

The Seta-Vent is suitable for use with any of the Seta range of Flash Point Testers, and is ideal for use where undesirable fumes need to be removed or where protection from air currents is required.  The unit incorporates fan and controller and can be dismantled for easy storage when not in use. 

Note: Flexible ducting is not supplied.

  Recirculator For Cooling Of Peltier Elements