Phone: 574/271-7020                     "Through Thick and Thin..."
Home Up
Home
Up

 

11200-4 SETA RUST PREVENTION TEST BATH

rust d665.jpg (136099 bytes)  

(click on picture to enlarge)

ASTM D665-IP 135; ASTM D3603; D5534; BS 2000 Part 135; FTMS 791b 4011; ISO 7120; NF T60-151;
JIS K2510

bullet

Ambient to 65°C temperature range

bullet

4 test stations

bullet

Constant speed sample stirrers

bullet

Adjustable stirrer positions

bullet

Remote digital temperature controller

Indicates the ability of steam turbine oils to prevent rusting of ferrous components, should water become mixed with the oil.  The 13 litre capacity oil bath has a temperature range of ambient to 65°C, and is controlled by a remote digital controller to within ±1°C.  The top panel of the bath accepts four test beakers. Each beaker is stirred at 1000 ±50 rev/min by a paddle stirrer. The position of the stirrers is adjustable for different methods of test. The test specimen, mounted in a holder (acrylic for normal oils, PTFE for synthetic fluids) is immersed in the test fluid in the beaker and supported by the beaker cover.

SUPPLIED WITH: four standard stirrers and beakers.

RUST PREVENTION TEST SPECIMENS & HOLDERS

11220-0 VERTICAL TEST SPECIMEN

ASTM D665 Procedures A, B and C

Comprises a vertical test specimen (SETA 11220-001) with an acrylic holder (for non synthetic oil samples) and beaker cover. Pack of 5.

11220-001 TEST SPECIMEN

ASTM D665 Procedures A, B and C

A vertical test specimen with a ground finish. Suitable for use with 11220-0 and 11290-0. Pack of 5

11290-0 SETA PTFE TEST SPECIMEN HOLDER

ASTM D665 Procedures A, B and C

A PTFE holder for use with synthetic oil samples (replaces the acrylic holder in 11220-0).

11330-0 PAIR OF TEST SPECIMENS

ASTM D3603; D5534

Comprises one each vertical and horizontal test specimens with a ground finish, an acrylic holder, and a PTFE washer.

11335-0 BEAKER COVER AND TEST SPECIMEN HOLDER

ASTM D3603; D5534

Comprises an acrylic beaker cover and holder suitable for use with 11330-0 test specimens.

ACCESSORIES

REQUIRED

TEST SPECIMENS & HOLDERS:

See list above.

11210-0 SETA AUXILIARY BLADE, for stirrer, used for heavier than water fluids, pack of 4.
11240-0 ALUMINUM OXIDE CLOTH, 150 grit (FEPA), 28 x 23cm, pack of 50.
11250-0 ALUMINUM OXIDE CLOTH, 240 grit (FEPA), 28 x 23cm, pack of 50.
11275-0 GRINDING AND POLISHING RIG, polishes the specimen at the speed specified in the method.
11280-0 SETA CHUCK BODY AND LOCK NUT, grips test specimen during polishing.
11325-0 BEAKER, 25ml
99100-2 ANALYTICAL BALANCE
99200-2 LABORATORY OVEN
94633-0 BATH OIL, 20 liters, for temperatures up to 80°C.
45001-0 SETAPLUS 12 MONTH EXTENDED WARRANTY

THERMOMETERS:

ASTM9C/IP15C or ASTM9F/IP15F of ASTM34C/IP21C

Other items which may be required include: Naphtha, Distilled water, Synthetic sea water.