(Click on picture to enlarge.)

Automatically determines Micro (Conradson) Carbon residue of petroleum products. The digitally controlled furnace has a temperature range of ambient to 500°C and is pre-programmed to run the carbon residue test.  Temperature, flow and pressure values are automatically controlled and values are displayed on the control panel, the test cycle includes an audible ‘end of test’ alarm. Test samples are suspended in a holder which locates into the airtight furnace. The instrument has an integral vinyl laminated condensate trap and exhaust outlet connection that allows fumes to be vented remotely if testing is not carried out under a fume hood. A low pressure and dual overtemperature cutouts ensure safe operation. Fan assisted air cooling is provided to minimise time between tests.

SUPPLIED WITH: 12 place holder (2ml or 4ml sample tubes), 6 place holder (16ml sample tubes), removal tool, condensate trap, oven lid, braided hose for N2 gas (3m), rubber exhaust hose (5m) and instructions.

Temp. Range:     Ambient to 500°C ±2°C
Ramp Rate:     10 to 15°C/min
Thermocouple:     Iron - constant on
Pressure controller:     20 to 750kPa
Primary pressure:     1400kPa max
Flowmeter:     0.1 to 1l/min
Flow rate:     Automatic, 150ml/min or 600ml/min
Consumption:     Approx. 40l/N2 per test
Voltage:     110/120V or 220/240V, 50/60Hz
Power:     1.6kW
Size (HxWxD):     46 x 35 x 39cm
Weight:     21kg