Phone: 574/271-7020 "Through Thick and Thin..."

12200-3 SETA EXISTENT GUM SOLID BLOCK BATH

(click on picture to enlarge)

ASTM D381-IP 131; EN 6246; BS 2000 Part 131; BS 4348 (Obs); ISO 6246; DIN 51 784; NFM07-004; FTMS 791c 3302; JIS K2261

	5 test stations
	Integral steam superheater
	Digital temperature control
	140° to 260°C temperature range
	Flow gauge calibrated for air and steam

A Solid Block Bath designed to carry out up to five simultaneous tests for determining existent gum content in fuels by the Jet Evaporation method. The unit comprises a solid block bath with integral steam super-heater, removable taper-fit conical steam/air jet adaptors with copper screens, and a steam/air flow control valve and gauge. The bath has five test wells, and a thermometer well. A steam/air jet adaptor is mounted over each of the test wells. Outlets can be individually checked for uniform flow of air or steam. The bath has a temperature range of 140° to 260°C, and is controlled by a digital temperature controller which displays both the set temperature and the actual bath temperature measured by a probe. The flow of steam or air is adjusted by an inlet control valve and monitored on a Bourdon gauge calibrated for both air and steam.

SUPPLIED WITH: a Bourdon gauge type flow indicator, calibrated for both air and steam, five steam/air jet assemblies, five borosilicate glass beakers and an instruction manual.

ACCESSORIES

REQUIRED

12311-2 INSTALLATION KIT, connects bath to steam generator and comprises all tubes, valves, filters and regulators needed for a typical installation.
12312-0 BEAKER EXTRACTION TOOL, for removal of beakers from solid block bath.

THERMOMETERS:

ASTM3C/IP73C; ASTM3F/IP73F

Other items which may be required include: Cooling Vessel, Glass filtering funnel, Special detergent or chromic acid, Solvents

OPTIONAL

12310-3 STEAM GENERATOR, electrically heated with water feed pump, safety valve (preset at 1 bar), water level control and cut-out.
Produces 18kg/hr (40 lb/hr) of steam at 100°C.
Maximum safe working pressure 10 bar (150 lbf/in2).
Voltage: 380/415V, 50/60Hz, 3 phase
Power: 12kW
Size (HxWxD): 64 x 61 x 91cm
Weight: 111kg

12314-0 AIR COMPRESSOR
15650-0 WATER PURIFIER, minimizes scale formation and connects in-line to water supply. Maximum inlet pressure 5 bar (75psi) and flow 60l/hr. Comprises fitting kitand filter cartridge.
99100-2 ANALYTICAL BALANCE
99200-2 DRYING OVEN
45001-0 SETAPLUS EXTENDED 12 MONTH WARRANTY

CALIBRATION, VERIFICATION & TRAINING

12250-0 SETA CALIBRATED AIR FLOWMETER, for calibrating and verifying the flow. Precision flowmeter with negligible back pressure (below 1kPa), graduated at 510, 600 and 690 ml/s. Includes calibration certificate.

Size (HxWxD): 57 x 14 x 17cm
Weight: 2.3kg

12255-0 SETA STEAM CALIBRATION KIT, connects to the bath jet assemblies and is supplied with a 2l graduated cylinder for calibrating and verifying the flow/volume of steam.