12900-0 SETA EVAPORATION CELL BATH

   (Click on picture to enlarge)

A digitally controlled oil bath with a temperature range of ambient to 200°C, and a high speed stirrer. The top plate can accommodate three evaporation cells. The thermostir unit has a 4 temperature memory, incorporates overtemperature and low fluid level alarms, has connection port for an external PT 100 probe, and an RS232 interface.

SUPPLIED WITH: Top plate and instruction manual.

REQUIRED

12800-0 SETA GREASE EVAPORATION CELL, (see below).
12810-0 SETA OIL EVAPORATION CELL, (see below).
16310-0 SETA BRACKET, to receive the support rod of Seta 12800-0 or 12810-0 Evaporation Cells. The outer wall of the Seta 12900-0 bath has fittings for three brackets, pack of 3.
94632-0 SILICONE OIL 20 litres, for filling bath, for use up to 150°C
94633-0 TECHNICAL WHITE OIL 20 litres, for filling bath, for use up to 100°C

ASTM22F/IP24F or ASTM22C/IP24C

SETA GREASE AND OIL EVAPORATION CELLS

Indicates the degree of volatile matter present in a grease or oil and are used mainly for specification purposes. Comprises a sample cup, cell body with cover and flow meter. The flow meter is connected to the cell by a short rigid tube to which a support column is attached.

   (Click on picture to enlarge)