Measures sediment up to 0.5%m/m
	Sample viscosities up to 130mm2/s
	10g sample size
	Two test stations

  (Click on picture to enlarge.)

A compact bench-mounted unit for determining the insoluble material content of residual fuel oils.  Consists of two filtration cells, heating (steam) and cooling (water) circuits, and a vacuum circuit with Buchner flask and gauge. Each filtration cell comprises a steam heated/water cooled brass cup with a sintered brass disk to support the microfiber filters. Temperature test points are fitted into the steam input lines, and a digital indicator and probe are available as an accessory.

SUPPLIED WITH: Buchner flask with safety cover, 2 filtration cells, 100 filters, and instruction manual.

Test samples:                  10g
Waste flask Capacity:     500ml
Filters:                             2 per cell 47mm dia, Whatman Type GF/A

Services:                          Steam 100°C
                                         Vacuum 40kPa absolute pressure
                                         Cooling water - ambient temp.

Connections:                   10mm dia riffled nozzles
Size (HxWxD):                40 x 47 x 18cm
Weight:                            8kg

REQUIRED

14030-2 AIR PUMP
16130-3 SETA STEAM GENERATOR, a small, compact, electrically heated unit with sufficient water capacity for up to 5 hrs operation. Fitted with an overheat cut-out, water level sight-tube, a pressure regulator set to relieve at 14kPa (2psi) and an overpressure relief valve. The tank is tested to 200kPa (29psi).
Voltage: 110/120V, 50/60Hz or: 220/240V, 50/60Hz
Power: 825W
Size (HxWxD): 28 x 22 x 40cm
Weight: 5.2kg

16150-2 THERMOMETER, stirring-type as required by method, 94° to 106°C.

Other items which may be required include: Desiccator,Beakers, Syringe, Weighing bottles, Forceps, Hotplate, Solvents, Mixer