Phone: 574/271-7020 "Through Thick and Thin..."

11400-6 SETA COPPER/SILVER CORROSION BATH

(click on picture to enlarge)

ASTM D130-IP154; D4048; IP112; IP227; BS 2000 Parts 112 and 154; DIN 51 811; EN 2160; FTMS 791b 5325; NF M07-015; JIS K2513

40° to 150°C temperature range

9 test stations

Copper/Silver corrosion tests

A stainless steel water or oil bath digitally temperature controlled to ±0.1°C over a temperature range of ambient to 150°C. The bath has nine test stations, each with a lid and hook for suspending either a copper corrosion test vessel (11500-0) or a test tube support (11420-0). A test tube support can hold up to three test tubes (11590-0). Any combination of copper corrosion vessels and test tube supports may be used. The top mounted thermostir unit incorporates over-temperature and low fluid level protection devices. A Silver Corrosion Conversion Kit (11510-0) is available to convert six of the test stations to hold the glassware (11430-0) required for silver corrosion tests.

SUPPLIED WITH: 9 lids and instruction manual.

11300-0 SETA COPPER CORROSION BATH

(click on picture to enlarge)

ASTM D130-IP154; D4048; IP112; IP227; BS 2000 Parts 112 and 154; DIN 51 811; EN 2160; FTMS 791b 5325; NF M07-015; JIS K2513

40° to 100°C temperature range

2 test stations

Compact footprint

A stainless steel water bath digitally temperature controlled to ±0.1°C over a temperature range of ambient to 100°C. The bath has two test stations, each with a lid and hook for suspending either a copper corrosion test vessel (11500-0) or a test tube support (11420-0). A test tube support can hold up to three test tubes (11590-0). Any combination of copper corrosion vessels and test tube supports may be used. The top mounted thermostir unit incorporates a low fluid level protection device.

SUPPLIED WITH: 2 lids and instruction manual.

ACCESSORIES - COPPER/SILVER CORROSION BATHS

REQUIRED

Select according to method of test:

11241-0 SILICON CARBIDE PAPER, 105µm (150 grit FEPA), 28 x 23cm, pack of 50.
11420-0 SUPPORT, for copper tests except on natural gasoline and aviation fuels. Holds three test tubes in bath, pack of 2.
11430-0 SILVER CORROSION GLASSWARE, comprises amber glass oil test tube, cold finger condenser with glass hook for test strip and glass cradle.
11440-0 SILVER TEST STRIPS, 99.9% Ag. 19 x 12.7 x 3mm, with material certificate, pack of 5.
11450-0 ASTM COLOR STANDARD, ASTM D1660; D3241/IP323.
11460-0 SILICON CARBIDE PAPER, 65µm (240 grit FEPA), 28 x 23cm, pack of 25.
11470-0 SILICON CARBIDE PAPER, 100 grit FEPA, 28 x 23cm, pack of 50.
11480-0 SILICON CARBIDE GRAINS, 105µm (150 mesh), 5 packs of 500g.
11500-0 COPPER CORROSION TEST VESSEL, for copper tests on natural gasoline and aviation fuels. Stainless steel with 'O' ring sealed screw-top closure. Maximum working pressure 7 bar (100 lbf/in2).
11510-0 SILVER CORROSION CONVERSION KIT, adapts 11400-6 for silver corrosion test. Comprises six support rings, water manifold, clips and tubing.
11530-0 SETA MULTI-STRIP VICE, holds up to five strips while polishing.
11550-0 COPPER TEST STRIP, 75 x 12.5 x 2.4mm, with material certificate, pack of 30.
11570-0 FLAT GLASS TEST TUBE, to protect strip during inspection, pack of 10.
11580-0 ASTM-IP COPPER STRIP CORROSION STANDARD, a set of 13 plaques, printed on aluminum and encapsulated in plastic for protection.
11590-0 TEST TUBE, 25 x 150mm, pack of 10.
15650-0 WATER PURIFIER, to minimize scale production.
94632-0 SILICONE BATH OIL 20 liters, for filling 11400-6 bath, for temperatures up to 150°C, 2 required
94633-0 BATH OIL, 20 liters, for filling 11400-6 bath, for temperatures up to 80°C, 2 required.
94635-0 BATH OIL, 20 liters, for filling 11400-6 bath, for temperatures between 80 and 120°C, 2 required.

THERMOMETERS:

ASTM12C/IP64C or ASTM12F/IP64F
Other items which may be required include: Solvents, Stainless steel forceps, Sample containers

Click here for information on the Seta Oxi-Cor oil/water bath to accommodate corrosion and oxidation test methods.