Phone: 574/271-7020 "Through Thick and Thin..."

97400-2 MICRO CARBON RESIDUE TESTER

(click on picture to enlarge)

ASTM D4530-IP 398; BS 2000 Part 398; ISO 10370

	Carbon residue range 0.1% to 30.0% (m/m)
	12 sample capacity
	Automatic temperature ramp and gas control
	Equivalent to ASTM D189; IP 13
	Automates carbon residue tests
	Temperature range ambient to 500°C
	End of test alarm
	Small footprint

Automatically determines Micro (Conradson) Carbon residue of petroleum products. The digitally controlled furnace has a temperature range of ambient to 500°C and is pre-programmed to run the carbon residue test. Temperature, flow and pressure values are automatically controlled and values are displayed on the control panel, the test cycle includes an audible ‘end of test’ alarm. Test samples are suspended in a holder which locates into the airtight furnace. The instrument has an integral vinyl laminated condensate trap and exhaust outlet connection that allows fumes to be vented remotely if testing is not carried out under a fume hood. A low pressure and dual overtemperature cutouts ensure safe operation. Fan assisted air cooling is provided to minimize time between tests.

SUPPLIED WITH: tool, condensate trap, oven lid, braided hose for N2 gas (3m), rubber exhaust hose (5m) and instructions.

ACCESSORIES

REQUIRED

97401-0 GLASS SAMPLE TUBE, 2ml, pack of 100
97402-0 GLASS SAMPLE TUBE, 16ml, pack of 100
97403-0 GLASS SAMPLE TUBE, 4ml, pack of 100, for ISO 10370, for use with carbon residues below 0.2%

Other items which may be required include: Nitrogen

OPTIONAL

97410-0 HOLDER, for mixed sample tubes (2 or 4ml x 6 and 16ml x 3)
99100-2 ANALYTICAL BALANCE