Phone: 574/271-7020                     "Through Thick and Thin..."

Home
Home

 

Index by ASTM Method Number

ASTM D5    

Penetration of Bituminous Materials

ASTM D 36

Softening Point of Bitumen (Ring-and-Ball Apparatus)

ASTM D 56

Flash Point by Tag Closed Tester

ASTM D 70

Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer)

ASTM D 86 - IP 123

Distillation of Petroleum Products

ASTM D 87 - IP 55

Melting Point of Petroleum Wax (Cooling Curve)

ASTM D 88

Saybolt Viscosity

ASTM D 91

Precipitation Number of Lubricating Oils

ASTM D 92 - IP 36

Flash and Fire Points By Cleveland Open Cup

ASTM D 93 - IP 34

Flash Point By Pensky-Martens Closed Cup Tester

ASTM D 95 - IP 74

Water in Petroleum Products and Bituminous Materials By Distillation

ASTM D 96

Water and Sediment In Crude Oil By Centrifuge Method

ASTM D 97 - IP 15

Pour Point of Petroleum Products

ASTM D 130 - IP 154

Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test

ASTM D 156

Saybolt Color of Petroleum Products

ASTM D 187

Burning Quality of Kerosene

ASTM D 189 - IP 13

Conradson Carbon Residue of Petroleum Products

ASTM D 216 (Obsolete)

Distillation of Natural Gasoline (Withdrawn 1988)

ASTM D 217 - IP 50

Cone Penetration of Lubricating Grease

ASTM D 244

Standard Test Methods for Emulsified Asphalts

ASTM D 287

API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

ASTM D 323

Vapor Pressure of Petroleum Products (Reid Method)

ASTM D 381 - IP 131

Existent Gum in Fuels By Jet Evaporation

ASTM D 397

Specification for Emulsified Asphalt (Withdrawn 1949) REPLACED BY D977

ASTM D 402 - IP 27

Distillation of Cut-Back Asphaltic (Bituminous) Products

ASTM D 445 - IP 71

Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)

ASTM D 446

Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

ASTM D 447

Test Method for Distillation of Plant Spray Oils (Withdrawn 1997) NO REPLACEMENT

ASTM D 473 - IP 53

Sediment in Crude Oils and Fuel Oils by the Extraction Method

ASTM D 524 - IP 14

Ramsbottom Carbon Residue of Petroleum Products

ASTM D 525

Oxidation Stability of Gasoline (Induction Period Method)

ASTM D 566 - IP 132

Dropping Point of Lubricating Grease

ASTM D 611 - IP 2 (A & B)

Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

ASTM D 665 - IP 135

Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

ASTM D 721 - IP 158

Standard Test Method for Oil Content of Petroleum Waxes

ASTM D 816 (Obsolete)

Standard Test Methods for Rubber Cements

ASTM D 850

Distillation of Industrial Aromatic Hydrocarbons and Related Materials

ASTM D 873 - IP 138

Oxidation Stability of Aviation Fuels (Potential Residue Method)

ASTM D 877

Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

ASTM D 892 - IP 146

Foaming Characteristics of Lubricating Oils

ASTM D 893

Insolubles In Used Lubricating Oils

ASTM D 937 - IP 179

Cone Penetration of Petrolatum

ASTM D 942 - IP 142

Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method

ASTM D 943

Oxidation Characteristics of Inhibited Mineral Oils

ASTM D 972

Evaporation Loss of Lubricating Greases and Oils

ASTM D 1018

Hydrogen In Petroleum Fractions

ASTM D 1072

Total Sulfur in Fuel Gases

ASTM D 1078

Distillation Range of Volatile Organic Liquids

ASTM D 1084 (Obsolete)

Viscosity of Adhesives

ASTM D 1085

Practice for Gauging Petroleum and Petroleum Products (Withdrawn 1995)

ASTM D 1092

Apparent Viscosity of Lubricating Greases

ASTM D 1142

Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature

ASTM D1160

ASTM D 1200

Viscosity by Ford Viscosity Cup

ASTM D 1209

Color of Clear Liquids (Platinum-Cobalt Scale)

ASTM D 1264

Determining the Water Washout Characteristics of Lubricating Greases

ASTM D 1265

Sampling Liquefied Petroleum (LP) Gases (Manual Method)

ASTM D 1266 - IP 107

Sulfur in Petroleum Products (Lamp Method)

ASTM D 1267

Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

ASTM D 1275 - IP 315

Corrosive Sulfur in Electrical Insulating Oils

ASTM D 1290

Sediment in Water-Emulsion Polishes by Centrifuge

ASTM D 1298 - IP 160

Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

ASTM D 1310

Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

ASTM D 1319 - IP 156

Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

ASTM D 1321

Needle Penetration of Petroleum Waxes

ASTM D 1322

Smoke Point of Kerosene and Aviation Turbine Fuel

ASTM D 1401

Water Separability of Petroleum Oils and Synthetic Fluids

ASTM D 1402 (Obsolete)

Effect of Copper on Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method

ASTM D 1403 - IP 310

Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

ASTM D 1472

Test for Set Time for Thermosetting Phenol-Formaldehyde Varnishes (Withdrawn 1971)

ASTM D 1481

Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

ASTM D 1500 - IP 196

ASTM Color of Petroleum Products (ASTM Color Scale)

ASTM D 1544

Color of Transparent Liquids (Gardner Color Scale)

ASTM D 1551 (Obsolete) - IP 63

Sulfur in Petroleum Oils (Quartz-Tube Method) (Withdrawn 1976)

ASTM D 1657

Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

ASTM D 1665

Engler Specific Viscosity of Tar Products

ASTM D 1742

Oil Separation from Lubricating Grease During Storage

ASTM D 1743

Determining Corrosion Preventive Properties of Lubricating Greases

ASTM D 1796

Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

ASTM D 1816

Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes

ASTM D 1831

Roll Stability of Lubricating Grease

ASTM D 1837

Volatility of Liquefied Petroleum (LP) Gases

ASTM D 1838

Copper Strip Corrosion By Liquefied Petroleum (LP) Gases

ASTM D 1840

Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet-Spectrophotometry

ASTM D 1966

Foots in Raw Linseed Oil (Gravimetric Method

ASTM D 2068

Filter Blocking Tendency of Distillate Fuel Oils

ASTM D 2111

Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures

ASTM D 2112

Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel

ASTM D 2158 - IP 317

Residues in Liquefied Petroleum (LP) Gases

ASTM D 2162

Basic Calibration of Master Viscometers and Viscosity Oil standards

ASTM D 2170 - IP 319

Kinematic Viscosity of Asphalts (Bitumen)

ASTM D 2171 - IP 222

Viscosity of Asphalts by Vacuum Capillary Viscometer

ASTM D 2265

Dropping Point of Lubricating Grease Over Wide Temperature Range

ASTM D 2266

Wear Preventive Characteristics of Lubricating Grease (Four Ball Method)

ASTM D 2270 - IP 226

Practice For Calculating Viscosity Index From Kinematic Viscosity at 40 and 100º C

ASTM D 2272

Oxidation Stability of Steam Turbine Oils By Rotating Bomb

ASTM D 2273

Trace Sediment in Lubricating Oils

ASTM D 2274 - IP 388

Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

ASTM D 2276 - IP 216

Particulate Contaminant in Aviation Fuel by Line Sampling

ASTM D 2384

Traces of Volatile Chlorides in Butane-Butene Mixtures

ASTM D 2386 - IP 16

Freezing Point of Aviation Fuels

ASTM D 2416

Coking Value of Tar and Pitch (Modified Conradson)

ASTM D 2420

Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

ASTM D 2440

Oxidation Stability of Mineral Insulating Oil

ASTM D 2500 - IP 219

Cloud Point of Petroleum Products

ASTM D 2547 (Obsolete) - IP 248

Lead in Gasoline,