Phone: 574/271-7020                     "Through Thick and Thin..."
Home Up
Home
Up

 

Accessories For Various ASTM
Penetration Test Methods

ITEMS REQUIRED FOR EACH TEST

Part/Method ASTM D5 ASTM D217 ASTM D937 ASTM D1321 ASTM D1403 ASTM D1831
Needles, Cones &Plungers 18500-0, 18510-0 or 18520-0 18140-0 or 18000-0 18000-0 18490-0 17910-0 + 17950-0 or
18060-0+17380-0		 17910-0 + 17950-0 or
18060-0 +17380-0
Sample Container 18470-0 or 18530-0 see Grease Workers 18120-0 18480-0 & 18481-0 see Grease Workers see Grease Workers
Transfer Dish 18550-0          
Grease Worker   17510-0, 17620-0 or 17790-0     17850-0 or 17920-0 17850-0 or 17920-0
Overflow Ring   17520-0        
Grease Cutter   18150-0        
Bath 18200-5 18200-5 18200-5 18200-5 18200-5 18200-5
Thermometer ASTM17C, 63C or 64C   IP38C ASTM64C    
Roll Stability Tester           19400-3

 

PENETRATION CONES

ASTM D217-IP 50; ASTM D937-IP 179;
ASTM D1403-IP 310; BS 2000 Parts 50; and 179; ISO 2137; DIN 51 580; DIN 51 804; NF T60-119

bullet

(unless otherwise stated)
3.17mm (1/8 inch) stem diameter

18140-0 SETA ASTM-IP STANDARD CONES

bullet

Acetal (solid) conical body

bullet

102.5g ±0.05g mass

18060-0 SETA HALF-SCALE CONE

bullet

Brass conical body

bullet

22.5g ±0.025g mass

bullet

For use with Light-Weight Plunger 17380-0

17910-0 SETA QUARTER SCALE CONE

bullet

Plastic conical body

bullet

3.0g ±0.025g mass

bullet

For use with Ultra Light-Weight Plunger 17950-0

18051-0 SETA ASTM-IP STANDARD CONE

bullet

Acetal (solid) conical body

bullet

102.5g ±0.05g mass

bullet

UKAS certification (IP 50 only)

18090-0 SETA SOIL CONE

BS 1377
bullet

Stainless steel conical body

bullet

32.5g mass

18085-0 BALL PENETRATION TOOL

bullet

BS 2499 Part 3

 

18000-0 SETA ASTM-IP OPTIONAL CONE

bullet

Brass (hollow) conical body

bullet

102.5g ±0.05g mass

18100-0 SETA CONE GAUGE

BS 1377
bullet

Tests the wear of 18090-0 Cone

18080-0 SETA SPECIAL FULL SCALE CONE

bullet

Aluminum conical body

bullet

29.8g ±0.05g mass

18050-0 SETA ASTM-IP OPTIONAL CONE

bullet

Brass (hollow) conical body

bullet

102.5g ±0.05g mass

bullet

UKAS certification (IP 50 only)

PENETRATION NEEDLES

ASTM D5; IP 49; BS 2000 Part 49; (unless otherwise stated)

 

18520-0 SETA STANDARD PENETRATION NEEDLE

bullet

2.5g mass

bullet

Pack of 3

18510-0 SETASTANDARD PENETRATION NEEDLE

bullet

2.5g mass

bullet

UKAS Certified (IP 49 Only)

18500-0 SETA PENETRATION NEEDLE

bullet

2.5g mass

bullet

For penetrations between 350 and 500

bullet

Pack of 3

18490-0 SETA WAX PENETRATION NEEDLE

ASTM D1321; IP 376; DIN 51 579
bullet

2.5g mass

 

18492-0 SETA WAX PENETRATION NEEDLE

bullet

2.5g mass

bullet

UKAS Certified

 

SAMPLE CONTAINERS

 

18120-0 SETA SAMPLE CONTAINER
(PETROLATUM)

ASTM D937-IP 179; BS 2000 Part 179;

DIN 51 580; ISO 2137; FTMS 791b 312
bullet

102mm diameter, 65mm deep

bullet

Water tight cover

bullet

Cylindrical with flat bottom

 

18470-0 SETA SAMPLE CONTAINER
(BITUMEN)

ASTM D5-IP49; BS 2000 Part 49
bullet

For penetrations between 200 and 350

bullet

70mm diameter, 45mm deep

bullet

Pack of 50

 

18530-0 SETA SAMPLE CONTAINER
(BITUMEN)

ASTM D5-IP49; BS 2000 Part 49
bullet

For penetrations below 200

bullet

55mm diameter, 35mm deep

bullet

Pack of 50

 

18540-0 SETA SAMPLE CONTAINER (IP49)

ASTM D5-IP49; BS 2000 Part 49
bullet

For penetrations between 200 and 350

bullet

55mm diameter, 57mm deep

bullet

Pack of 50

18550-0 SETA TRANSFER DISH

ASTM D5-IP49; BS 2000 Part 49
bullet

Copper

bullet

For transferring containers from waterbath to penetrometer

bullet

Pack of 2

18560-0 SETA 4-WAY MICRO PENETRATION CUP

bullet

For bitumen

bullet

For rapid penetration quality control testsnot in compliance with the test methods listed above

18480-0 SETA TEST SPECIMEN CONTAINER (WAX)

ASTM D1321; IP 376; DIN 51 579
bullet

Brass, cylindrical

bullet

25.4mm diameter, 31.8mm deep

bullet

Pack of 2

18481-0 SETA BRASS BASE PLATE

ASTM D1321; IP 376; DIN 51 579
bullet

Supports two 18480-0 wax containers

 

PLUNGERS

ASTM D1403 - IP 310; DIN 51 804; ISO 2137

 

17380-0 LIGHT-WEIGHT PLUNGER

bullet

For use with 18060-0 Half-scale cone

bullet

15.0g ±0.025g mass

17950-0 ULTRA LIGHT-WEIGHT PLUNGER

bullet

For use with 17910-0 Quarter-scale cone

bullet

6.38g ±0.025g mass